Skip to content
Skip to product information
Description

4 Way Design
For better transient performance and greater acoustic efficiency
Its exclusive design allows less distortion and higher sound pressure level at all frequencies. Its two compression drivers allow high levels to be obtained at high frequencies and its two 8'' woofers distribute the medium and low frequencies to obtain better acoustic efficiency.

Cabinet design
Optimized cabinet
Through simulations of the behavior of different cabinet formats, an optimized design was achieved with which the internal modes are reduced, obtaining less distortion and greater acoustic performance.

Software
Connect each unit of KLS-8.3 and KLS 18.1S and through the exclusive processing software and control each unit individually.

- Individual control of up to 32 devices
- 10 EQ with 11 types of variable FIR filters
- All Pass, parametric, Peaking, Shelvin (LS/HS), General (LP/HP/BP/BS), Butterworth (LP/HP), Chebyshev (LP/HP), Tone control, Notch and IIR Coefficient
- Master LPF, HPF, Delay, Noise Gate, Compressor/Limiter and much more

Technical specifications

Imputs - XLR input
Outputs - XLR link output
Power - 1400W RMS
Volume - Individual volume control
Speaker
Type - 3-way fan active speaker
Frequency response - 60 Hz – 20 kHz
Impedance - 4 Ω
Maximum NPS (1m) - 130 dB
Driver - 1 x 8'' woofer, 2.5'' voice coil, 2 x 1.4'' compression drivers
Cabinet - Optimized design of ventilated cabinet composed of Birch Wood
Grid - 1.2mm steel

 

 

 

LINE ARRAY SKP KLS 8.3

SKU

8000974

Description

4 Way Design
For better transient performance and greater acoustic efficiency
Its exclusive design allows less distortion and higher sound pressure level at all frequencies. Its two compression drivers allow high levels to be obtained at high frequencies and its two 8'' woofers distribute the medium and low frequencies to obtain better acoustic efficiency.

Cabinet design
Optimized cabinet
Through simulations of the behavior of different cabinet formats, an optimized design was achieved with which the internal modes are reduced, obtaining less distortion and greater acoustic performance.

Software
Connect each unit of KLS-8.3 and KLS 18.1S and through the exclusive processing software and control each unit individually.

- Individual control of up to 32 devices
- 10 EQ with 11 types of variable FIR filters
- All Pass, parametric, Peaking, Shelvin (LS/HS), General (LP/HP/BP/BS), Butterworth (LP/HP), Chebyshev (LP/HP), Tone control, Notch and IIR Coefficient
- Master LPF, HPF, Delay, Noise Gate, Compressor/Limiter and much more

Technical specifications

Imputs - XLR input
Outputs - XLR link output
Power - 1400W RMS
Volume - Individual volume control
Speaker
Type - 3-way fan active speaker
Frequency response - 60 Hz – 20 kHz
Impedance - 4 Ω
Maximum NPS (1m) - 130 dB
Driver - 1 x 8'' woofer, 2.5'' voice coil, 2 x 1.4'' compression drivers
Cabinet - Optimized design of ventilated cabinet composed of Birch Wood
Grid - 1.2mm steel

 

 

 

Drawer Title
Similar Products